|
NWMO | Two doors together is what I did on my main side a 24' and 18' column swings up into the header if I want the full opening. and another 18' on a side wall, 2 walk in doors Midland overhead doors. by putting the two doors on one side I figured I had a lot more usable space on the back wall.
If you doing a steel building one thing I wish I had done. I have a lean to on one side but I did not have them pre drill the holes in the red iron on the other side in case I want to add a lean to down the road on that side. Not a huge deal but makes it a whole lot easier to add later.
Good luck a new shop will be nice to work in which ever way you go. | |
|
Where to put another door in this shop?
