Jeffersonville, OH | MDM22 - 10/13/2025 18:39
It has broke gearbox where shaft goes thru Chris…heck of a mess. Top of gearbox housing
Ok, can't see that. Manual incoming for you
If you pull the sheet metal off the top, you can pull a 3 bolt housing and lift the sprocket drive shaft right off the top. Have to pull both gathering chains, the tensioner, 2 snouts I believe, and then the metal will come off. All that has to happen before the gearbox will come out the bottom, which doesn't need to happen. Should have it apart in an hour, not too bad.
Chris |
Gleaner 3000 mess up
