|
Western NY | Long story short, thought I was getting a deal on a nice looking TR98 via online auction. I knew the concaves were out of it, but no close up pictures of exactly how much was disassembled. After getting it home, it appears the concaves were taken out and nuts/bolts/shims were just randomly laying places.
I have a TR75 but have never had the concaves out nor really messed with them. It appears the H-brace is not bent or in bad shape which is what my first thought was for it to be taken apart. I have a digital repair manual for it, but my question is should I be looking for anything particular prior to or during assembly to ensure that when I fire it up I don't have a catastrophic failure?
 (IMG20251012151513 (full).jpg)
 (IMG20251012151519 (full).jpg)
 (IMG20251012151526 (full).jpg)
 (IMG20251012151545 (full).jpg)
 (IMG20251012151551 (full).jpg)
 (IMG20251012151558 (full).jpg)
 (IMG20251012151606 (full).jpg)
 (IMG20251012151717 (full).jpg)
 (IMG20251012151723 (full).jpg)
Attachments
----------------
 IMG20251012151513 (full).jpg (112KB - 1 downloads)
IMG20251012151519 (full).jpg (139KB - 1 downloads)
IMG20251012151526 (full).jpg (121KB - 1 downloads)
IMG20251012151545 (full).jpg (123KB - 1 downloads)
IMG20251012151551 (full).jpg (122KB - 1 downloads)
IMG20251012151558 (full).jpg (139KB - 1 downloads)
IMG20251012151606 (full).jpg (114KB - 1 downloads)
IMG20251012151717 (full).jpg (145KB - 1 downloads)
IMG20251012151723 (full).jpg (154KB - 1 downloads)
| |
|
TR98 Concaves
