|
Kansas | I have made a dip stick and run the oil level at the top of the sight glass.
I’ll check the screen inside the reservoir.
Are about the only places that can get air in the system between the reservoir and pump?
I don’t see any oil leaks around. A couple years ago we put all new main hydraulic hoses on.
The valve stack has been rebuilt 2000 hours back
The steering issue has recently started.
About 500 hours back it was to the dealer to get hinge pins fixed and they checked the hydraulic flow and say each remote is good. Maybe they need the fan running while checking the remotes.
I’ll change the down pressure from #1 to #2 and see if it raises any faster.
Thanks very much!!
| |
|
Ford/NH 9682 hydraulic problems running an air drill help
