Fairfield County, Ohio, USA | I've used one of these:
https://store.agexpress.com/whisker-lift-switch-kit/?searchid=201061...
and one of these:
https://www.amazon.com/dp/B099S3ZYX9
and there are many other variations out there. Plungers, reed switches, etc. Just depends what would be best for your application. Custom wiring may be necessary, depending on your switch chosen, what kind of cabling you have to get it back to the module, etc.
They generally would be considered momentary (because they should only hold their state while tripped). I can't recall whether Ag Leader expects NC or NO, but many switches have both available.
For InCommand 1200 and before, you'd connect the switch to an Application Rate Module. For InCommand GO, you'd connect it to a standalone implement switch module.
|
Ag Leader implement switch
