Iowa | nilbart - 9/30/2025 06:35 Yes turned Rtk to off. Also had to change baud rate to 38400 and output rate to 5 hz . Also had to uncheck a box in strings. That leaves the cga,zda, and gsa boxes checked . Maybe will have a revelation this morning. Got a 3000 receiver for back up.
None of that is needed for using SF1 and a JD screen. Those settings are only for sending extra data out of the 3000 to a non JD screen. Unless that's what you're doing. |
Starfire 6000 receiver problem
