|
Holly Hill, SC | Start by looking at the data as you harvest, not the map. As mentioned, header is down and calibrated to be in recording mode while harvesting? (Arrow down versus up on the monitor). Make sure you have a rectangle set on your screen to show flow (bu/hr), this will let you know if your flowmeter is working all the time. Speed or distance works all the time? You can not have yield if you don't have both speed and flow working. What about the other maps? Moisture and coverage maps, do they show up consistently? On your yield map is the legend set where it will show something all the time? If you set the lowest value at 250 bu/a there might be quite a few gaps.
Edited by shulerfarm 9/28/2025 22:29
| |
|
8250 with 700 with very little on yield map
