Glenwood, Mn | SPOLJC - 9/26/2025 00:11
I can configure that port to export GGA in Ag remote in port configuration, but also in GPS menu in GPS out where I can also let GGA on all ports?
Where should I cofigure that?
If using autopilot, your only options for gps output are port a , b or the nav 9 pin diagnostic.
All three can be configured via the gps page and no need to go into ag remote. Port d should be where you need to input corrections and configured via ag remote.
Reason I was told it “broke” after fmx version 7.xx is that port d is direct to the gps engine so the nmea out of d was never tilt comped. So they effectively forced you to grab it out of the nav. No one can give me a clear answer on whether port a or b are tilt comped. So I always just recommend to come out of the nav. That’s where 20/20 should be pulled from and third party controllers. This is the “known” working way. |
Trimble fmx NMEA out
