|
Holly Hill, SC | I have a ATU 200, 2600 monitor and 3000 receiver in my 5088 combine. Has been great. No problem tapping into the power studs near fuse panel. The ATU will come with some harnesses you will still need a universal harness from Ag Express for monitor/power. The hub that came with the ATU fit perfectly on the steering wheel splines. Your 5130 might be the same. I made my own anti rotation bracket, the universal one from JD was too basic and would not be a secure fit for the ATU. Get the ATU 300, it should be smoother.
Also have a JD 2600, 3000 receiver and Agri GPS bridge on my 6150 with integrated valve. That has been awesome.
Both of my machines I made a custom mount for the monitor at the top right corner post. I used 4 about 1/4" sheet metal screws to secure the mount. Was very carefully predrilling and not to use overly long screws. Not sure if there are wires in the corner post.
Receiver mount: on the 5088 I made a mount out of plastic that screwed to the top of the roof near the front. On the 6150 I made two steel plates (complicated 3 dimensional shape) bolted to the hand rail above the windshield. Between the plates I mounted a plastic block that the receiver secures too.
Autosteer on a combine has been great, not just a luxury item. It helps on efficency. Skip anywhere in a corn field and always be on the correct set of rows. Focus on grain cart instead of steering. With multiple combines in wheat, easy to make skip swath so both machine work in tandem across the field. Eat a plate of BBQ while the combine steers. Etc....
Will try to get some pictures tomorrow.
Edited by shulerfarm 9/15/2025 21:57
 (Screenshot_20250915_225252_Photos (full).jpg)
 (Screenshot_20250915_225350_Photos (full).jpg)
Attachments
----------------
 Screenshot_20250915_225252_Photos (full).jpg (74KB - 18 downloads)
Screenshot_20250915_225350_Photos (full).jpg (139KB - 22 downloads)
| |
|
Putting a JD ATU 300 or 200 on a Case IH mid range combine
