|
Central IA | My first suggestion is to select the Client, Farm, Field that you are currently physically sitting in. Go to the Fields & Boundaries app and check to see if there is a boundary. I know you said all of your fields have boundaries, but I didnt know if that was in Operations Center and you arent running Data Sync Setup. The display, not Operations Center, needs an active boundary to know where the field is and see if it is physically near your machine that has GPS signal. That would be the first thing I would check.
I am not as familiar with your second issue. Can you manually navigate to the "Work Setup" and "Tread Adjust" by going to the "Menu" button in the bottom right? If you can, then I would file a case with your dealer. If they don't show up I would make sure your dual display settings are setup properly. | |
|
GS5 in JD 408R sprayer with glitches??
