|
northeast ohio | If the tanker has Raven cabling, then putting the module in the cab with proper harness is.probably the least expensive option. I’m not very familiar with a 660 harness but I don’t believe it’s the same as a 440/450.
If the tanker doesn’t have a harness fron flow meter to the hitch, then you could consider mounting the module in a protective enclosure on the tanker and run a CAN/Power cable 75528-xx from the cab to the module. Unless you need section control, a rate only module should be sufficient. Here’s the cabling guide. If you are looking for used components, I have a RSCM only or with full harness listed in classifieds. Can come up with a switch box and other cables. Do not have a 75503 or 88644 which are the Raven replacement cable options.
https://modernaginc.com/wp-content/uploads/2016/11/fmx_cabling-guide... | |
|
Trimble FMX for liquid manure rate control?
