| SJR - 8/16/2025 10:20
You are able to dump the dry into your ydrop 32 and spray solution? Or do you have a melting down procedure? I’ve been wanting to play with the dry stuff here. I’ve been doing foliars with some in furrow. Any salesman I ask about the stuff basically laughs and says “you can’t afford it.” They don’t want to bother. I ydrop and that would would at least fit for me if I can get a supply of it.
I had better add that it ended requiring a special Ydrop pass because it turned 32pct thick and I already knew I couldn't put ATS with it. So we made a pass with MN sulfate and solubor which also mixes much better with water than 32pct. Then had to come back with the N. That wasn't the plan, but that's what it ended up being. The plan was only to put it in the strip til and some postemergence but it became evident that I wasn't getting the results I wanted so that's when the ydrop pass came into play. I might put it all on with the planter next spring to eliminate that extra pass but I have some time to figure that out yet.
Good luck
Edited by NEIAAG 8/16/2025 12:02
|
manganese in 32% ?
