|
| I am currently trying to set up a Vaderstad tempo T planter for auto section control. It has the o9Oda7QI0gBld style control box (brick looking thing) I am wanting to use it via TOPCON x35 console. Tractor has ISO-BUS but the planter does not have ISO-Bus there is a 12pin deutsch plug with 3 wires going into it (i think it was set up using a trimble 372). There is also a black round pin connector which hooks into the planter from control box.
How can I get the gps connected to the planter to enable auto shut off/section control?
 (1000000719 (full).jpg)
 (1000000727 (full).jpg)
 (1000000731 (full).jpg)
Attachments
----------------
 1000000719 (full).jpg (221KB - 7 downloads)
1000000727 (full).jpg (148KB - 5 downloads)
1000000731 (full).jpg (177KB - 6 downloads)
| |
|
Section controll
