|
west central Iowa | I have a number of the Bohlman concrete cattle waters with the overflow pipe. Tanks have been in, about 18 months and most of the overflow pipes are loose in the concrete. It looks like they installed a grey PVC threaded connector in form then poured the concrete tank. Overflow pipe was then screwed into connector. This connector is loose in concrete and leaking a lot of water into our pits. Looks like I could drive this piece through the bottom of the tank. If I got everything cleaned up, is there an epoxy that would glue connector tight to the concrete again? Any other ideas or words of wisdom? Thanks. Eric | |
|
Need help on Bohlman water tank
