swenzel - 8/8/2025 12:51
The Starfire 7000 and 7500 with permanent RTK unlocks include mobile RTK unlock. You can then access either CMR or RTCM3 corrections. What this means is you can run on almost any cellular RTK network at that point and not by tied to a John Deere network.
So once you get to 7000 or newer deere receiver with the correct rtk unlocks you can use a standard RTCM base? Do you still get the satellite based corrections for a backup if you get disconnected from your base? Do you know what RTCM messages need to be in the data stream?
| 
Is Agra-GPS CRG a viable sf7500 sf-rtk replacement?
