Near Intersection of I-35 & I-90 Southern Mn. | I am not aware of an ISO ECU that does Section Control Only.
Although this is of no real help for the OP with his request, this could be handled with an Ag Leader system. Ag Leader has a Clutch Control Module (not ISO) that is widely used with planters and drills that would work for such an arrangement. A relay could be used to reverse the output logic if necessary and interface with the existing system through the existing clutches and wiring.
An appropriate Ag Leader display and switch input module would be required. Some of the items needed might already be available from another rig and could be moved or reused with the Valmar.
Again this does not fit the original request to work with the Trimble but may be of interest to someone else
Edited by tedbear 8/8/2025 08:04
|
Trimble Basic section control
