|
Indiana | I've visited this topic before but never really figured out an answer. Is it possible to run half width disconnect clutches with a JD dry rate controller? This is on a valmar air seeder box. I've figured out that the clutches just require 12v power to engage the drive shaft. I'm running this with a hydraulic drive, there is just 1 drive that runs both sides of the box. I'm partly unsure how to set it up in the monitor, if I input it as 2 bins then it wants me to set up 2 pwm valves but that seems more like it's running 2 products across the whole implement, I'm just trying to run 1 product but want to turn off half of it from time to time to not have as much overlap. | |
|
Greenstar Dry Rate Controller Section Clutches
