|
Clifton Kansas | I'm the one that created a configuration that only has the switch box for a module but doesn't use it for anything for machine operation. It stays in the tractor for use with other equipment.
I use this method with several different configurations one is a 30' air seeder another one is a 5' track filler, another is the grain cart.
You cannot get an accurate acre count, unless you touch the button at the right time or don't overlap any, but you can see on the screen and log where you have been.
The auto swath is 100% of the swath because you can't do a multiple section equipment only 1 width is allowed. So it only shuts off if you are totally in an area where you have been.
The headland part also works as a switch for controlling coverage map. I use this because sometimes I do headlands last and it stops the coverage map as I am turning around on the ends, helping the acres to be closer to right. It also helps when doing headlands first if your boundary is outside of your first pass or you happen to have a gap between your headland passes, the coverage will not turn on while in the headland area.
| |
|
Integra coverage log switch
