Posted 8/2/2025 14:00 (#11317714 - in reply to #11317547) Subject: RE: Check my math...32% into 28%
EC Nebraska
il weedman - 8/2/2025 11:18
If you blow it in the bottom through the valve I suggest pulling product out afterwards and pumping it back in to make sure there is 28% in the valve. Had an issue once doing what you suggest and when closing ball valve it trapped water in valve and froze and cracked. Pretty much defeats the purpose of all of this when you find it on the ground.
I was planning to blow air through the line after pumping in water, and shutting the valve while the air is blowing. Or is that a bad idea?
Check my math...32% into 28%
