Holland, Indiana (SW IN) | JellyJugz - 8/1/2025 13:43
Will that thing work on good HSS bits(not harbor freight hss, good ones)?
I sharpened all in these two trays and another 100 or so
I’m sure some were better HSS
Dan
Add I finally got sharpening out crazy--didn't do any less than 1/4" but bet it would work on smaller bits
After sharpening every bit in that assortment will cut even the cheap ones
Edited by Dan Loehr 8/1/2025 15:31
 (IMG_5138 (full).jpeg)
 (IMG_5139 (full).jpeg)
 (IMG_5142 (full).jpeg)
Attachments
----------------
 IMG_5138 (full).jpeg (147KB - 12 downloads)
IMG_5139 (full).jpeg (151KB - 8 downloads)
IMG_5142 (full).jpeg (141KB - 5 downloads)
|
Drill bits/drill doctor
