Posted 7/31/2025 14:18 (#11315661 - in reply to #11315646) Subject: RE: John Deere C500 pivot swings to far
Ne Nebraska
Yep, same issues here, old 956 was fine, c500 goes too far. Talked with dealer and didn’t seem to have any reasons or answers. Went to hydraulic shop and had about a 3/8” piece of tubing put inside on the cylinder to shorten the stroke, should have went about 3/4” tho. It is annoying to have to pull it back in every time. 2pt machine here
John Deere C500 pivot swings to far
