|
Western New York State | There is a master switch box and the cabling to go from the master switch box to the FM1000 and RSCM, Field IQ RSCM 75774-00 connected to the Raven harness using a WET WORKS cable. After closer look, they added another 16 pin AMP connector. the third picture shows the original plug on the left that contains only the section sense wires, and the cobbled up mess on the right. My plan is to undo this mess once I can figure out what equipment I need in order to get the Field-IQ working. Looking at vantagenortheast, it looks like they sell a kit for Field-IQ Spray Control Kit - Sprayer w/ Existing Raven 4XX SKU:99104-00 that contains:
Field IQ Rate and Section Control Module; PN 75774-01
Field IQ Platform Kit; PN 99004-00 (88644/59783/80428)
I don't know how the 75774-00 and 75774-00 differ. And I would need to check the WET WORKS cable to make sure it has the correct pinouts.
Edited by Old1 7/21/2025 16:53
 (20250721_171103 (full).jpg)
 (20250721_171121 (full).jpg)
 (20250721_171204 (full).jpg)
 (20250721_171137 (full).jpg)
Attachments
----------------
 20250721_171103 (full).jpg (138KB - 10 downloads)
20250721_171121 (full).jpg (87KB - 7 downloads)
20250721_171204 (full).jpg (137KB - 8 downloads)
20250721_171137 (full).jpg (82KB - 7 downloads)
| |
|
Rogator 1064 and Trimble Field-IQ
