|
| Needing some help on a 2011 STS 12. The machine has been run to this point with a Raven Viper Pro and control nodes. Decided to switch the machine over to a Deere rate controller and guidance system. We purchased a New rate controller from Deere and all harnessing from Ag Express to make the conversion. One of the harnesses Ag Express sold us (AE3069K) plugs into the existing hagie boom control harness, raven flow control harness then to the Deere rate controller. Per Ag Express that harness allows me to use my existing master on off on the hydro handle, but no matter what I do I can’t get it to run the master switch or control the boom sections. I tried a foot switch and that would turn the master on and off but would not turn the boom sections on or off. Any ideas on where to look or what to try? TIA! | |
|
Raven to Deere conversion Hagie STS12
