|
| The two 5/16" carriage bolts are on the Roll Belt balers like the 560. There really is no way to adjust the net tail length on the BR balers if the knife linkage is set up correctly. Increasing the brake pressure will make the problem worse if the baffle is not adjusted to contact the duckbill. We need to know if the net is not in the duckbill once the net is cut and that can only be checked before the next bale is made. Is the net completely missing from the duckbill when the net fails to start or is the net shredded which is caused by other factors. | |
|
New Holland 7090 Net Wrap Issues
