Southeastern Tipton County, Indiana | TdsID - 7/7/2025 13:26 The draft control arm seals are leaking on this 7120. I can't find anything on how to replace them in my service manual. Can you just disconnect the 3 point arms, take the bolt out of the end and replace the seals? Or is it a more involved process?
Same procedure as any old 706 and newer IH tractors.
Slide the arms off of the shaft, pry out the old seal and drive in a new one.
Install the arm on the shaft in the same position.
Left seal is P/N 1347918C1
Right seal is P/N 1347919C1 |
Case 7120 Leaking Draft Arm Seals
