|
Lamar, MO | Check engine oil pressure switch on the motor. It tells the system that the machine is running and ok allow hydraulics to function, release park brake, run separator. Can jump outside wires on the three prong plug to get running in a pinch. If jumped I believe the hydraulics are active with the key on and no running engine, so don't drop the header on top of someone. Also had bad alternator cause problems but usually it just won't engage the feeder house. There is also an eop relay on the fuse panel that can malfunction.
Edited by mavis 7/7/2025 20:14
| |
|
2388 PTO & Feeder won't Engage, and Feeder won't Move.
