|
Latimer Iowa | We just picked a 42 foot shelbourne stripper head to run on a 8250. What concaves do you guys recommend? On our FD250 macdon we had issues getting material out of the rotor fast enough so are running 2 round bar and 2 large wire in front. Second combine has all large wire currently. I do have a set of 4 small grains concaves I could throw 2 or 4 in if it’s recommended? Thinking we won’t need the round bar because of it being a stripper head?
This will be on 130-180 bpa oats with some lodging and some green yet.
Edited by Green Acres Guy 7/7/2025 16:38
 (IMG_5423 (full).jpeg)
 (IMG_5421 (full).jpeg)
 (IMG_3553 (full).jpeg)
 (IMG_3522 (full).jpeg)
 (IMG_5424 (full).jpeg)
 (IMG_5397 (full).jpeg)
Attachments
----------------
 IMG_5423 (full).jpeg (138KB - 13 downloads)
IMG_5421 (full).jpeg (179KB - 13 downloads)
IMG_3553 (full).jpeg (126KB - 11 downloads)
IMG_3522 (full).jpeg (232KB - 9 downloads)
IMG_5424 (full).jpeg (186KB - 13 downloads)
IMG_5397 (full).jpeg (179KB - 2 downloads)
| |
|
8250 case with 42’ stripper settings
