|
South Western Ontario | Very carefully remove the hose from the low pressure side of the boom lift cylinder. Take time to make sure you are pulling the correct hose. If it's leaking internally, it should leaking out the low pressure port. I cannot overstate being careful, fluid injection is not a thing you want to be involved with. To see pictures of it is enough to scare you off. A thing to bear in mind is that if it's bypassing the piston, that oil still needs to go somewhere. Is it also bypassing a spool in the valve?
Edited by JoelV 7/7/2025 12:18
| |
|
How do you know cylinder question
