|
SC Nebraska | Ok…it’s theoretically possible but…..
I’m guessing:
Volume guns need at least 100 gpm @ 100 psi (each) Maybe more.
A big booster pump and end gun uses 50-100 gpm.
An average pivot runs 35 psi.
Things don’t really match.
Would be easy enough to start the solid set when end gun goes off, but you’ll need to buy a booster pump, send water through a Hudson valve and then plumb and valve to supply one stationary gun at a time.
Would be better and easier to set up the stationary guns as a stand alone system and run them all at once. | |
|
using a volume gun in conjunction with a pivot
