Posted 7/5/2025 20:37 (#11287281 - in reply to #11287193) Subject: RE: PENTA 5420 TMR overloading my Deere 6120R
Sunburst Montana
I think you are way undersized if the 10,000 lbs is your load. We have a 1,200 ft twin screw ND mixer. We just grind regular hay bales with about 200 gal of water added in which comes out to around usually 8,000 lb loads. Run it with a JD 8300 and it knows it's back there.
PENTA 5240 TMR overloading my Deere 6120R
