Thumb of Michigan | puff33m - 7/4/2025 10:23
Finally got a toehold on some peanut oil.
This isn't really a feed value question. But what can I expect to see adding oil to my grinder mixer. I would apply it as I unload corn from the trailer.
We're talking about +/- four 5 gallon buckets (20 gallons) per ton of corn I guess. Will that mix somewhat evenly and will I like the texture or moisture f the product?
I don't want it to be like the time I dumped 700 pounds of peanuts in the grinder. Hard way to learn.
I have a 2” PVC pipe, with 3/8” holes drilled in the bottom about 2” a part, with a threaded plug on far end. Two 45 degrees on other end, with a 2” coupling on top (this last one was put on after sticking through a ¾” plywood board, that sits on top of grinder mixer hatch opening. I found a funnel that threaded into the coupling. Basically, an L shaped PVC pipe. |
Add liquid feed to my grinder mixer
