|
Sac & Story county IA | You can use the third pole in the contactor for the auxiliary contact. Power from either L1 or L2 goes to stop button. Other terminal of stop button goes to one terminal of start button and another wire to one side of third contactor pole. Other terminal of start button goes to coil. A wire goes from other terminal of contactor third pole to coil, same terminal as wire from start button. Other terminal of coil goes to neutral because of coil being 120 volt. L1 and L2 contactor and T1 and T2 will be motor leads.
I imagine there are Youtube videos that explain this stuff better than me
Edited by E718 6/30/2025 20:50
| |
|
Wiring bin unload auger
