|
NWMO | I spent a ton of money on tips figuring mine out... But have came to the conclusion that i prefer LDX 08s alternating on front large port for 30hz using both solenoids... Like this better than any of my double tip combos... Reason is with running front and rear nozzles didn't really allow for droplet size change it more or less gave me same size dropletes over larger speed ranges... So with a single O8 alternating forward and rearward spray patterns on 15" centers... This allow me a bigger pressure difference for drift... So say you against sensitive border... I can now drop psi down under 20 psi with a 08 size tip and draw a line in a decent breeze... You will have to slow down but who wouldn't in this situation... As I speed up then I can add pressure back as I speed up... So normally in my area 12mph is plenty and I can get a ideal duty cycle around 50psi... Better running I can move up to 60-80psi with more mph... Just adjust your pressure off your duty cycle bar graff... 55-70% is perfect on 30hz... This is for 20gpa on 15" if you are on 20" I'd be looking at size 10s... Will use the a+b modes on fungicide/foliar ect... Where I'm after a consistant fog and PSI over large change in MPH....
Simple...
30hz single is great for large PSI changes along with large speed changes....
Twin 15hz A+B dual mode is better for consistant PSI over large MPH changes....
Edited by jrmac 6/30/2025 17:01
| |
|
Exactapply nozzle selection question
