|
| I have pumped with the hand pump button until it goes hard but nothing.
Where is the bleeder you are referring to, the screw on top the filter assembly?
I have changed the filters before and firmed the hand pump and its started fine.
Two things I have noticed, contributors mention turning the key on and fuel pump should hum and begin priming. I hear no humming or noise at all. Second I cracked a line running from filters to a box above. Fuel ran out the line going into that box, but cracked a line that went to injectors and no diesel running. So it appears either a blockage in that box or no power. | |
|
2008 MF 7475 Perkins 1106 engine - procedure for bleeding engine
