|
| Put it in the ground and run it.
While applying, hit the speed button to verify speed.
Then hit the volume per minute button.
Then hit the area per hour button.
One of them will be zero.
Speed=0 check the speed source and wiring
Volume per minute button= 0 check the flow meter and wiring to the flow meter.
Area per hour is speed x boom width. If you have speed, then you have an issue with setup like width=0 (probably not) or the switches are not functioning.
That is the fast and dirty of troubleshooting no flow on a Raven console | |
|
Raven 440 help
