|
|
Ohio | Looking for the connector that goes into the back of the ag leader go monitors aux connection. I believe its just the male version of the end of the display cable i have in the picture. Thanks
Edited by kramer10 6/20/2025 13:36
 (20250620_143221 (full).jpg)
 (20250620_143239 (full).jpg)
Attachments
----------------
 20250620_143221 (full).jpg (199KB - 50 downloads)
20250620_143239 (full).jpg (91KB - 46 downloads)
|
|
| |
|
SW WI | Auxillary Serial Cable and/or Camera Cable. Can be used for cameras and/or NTRIP connection for RTK. I have attached links to our website for your reference.
https://www.andrewsagsupply.com/products/incommand-auxillary-serial-...
https://www.andrewsagsupply.com/products/ag-leader-4005644-12-auxili...
https://www.andrewsagsupply.com/products/ag-leader-4005560-12-auxili...
https://www.andrewsagsupply.com/products/ag-leader-4004493-12-cable-...
https://www.andrewsagsupply.com/products/ag-leader-4004494-12-cable-...
Edited by andrewsfarmandag 6/20/2025 15:38
|
|
| |
|
Ohio | I know of those cables. I want to see if i could find those ends to build my own ntrip cables. That way I can have one in every machine hidden like all my other cables for hopefully a lot less money. Will probably by the camera one if I decide to go down that route. |
|
| |
|
Hennepin, IL | https://talk.newagtalk.com/forums/thread-view.asp?tid=1185336&mid=11... |
|
| |
|
Near Intersection of I-35 & I-90 Southern Mn. | I use the AUX connector on my InCommand 1200 for video. My Ag Leader dealer had a cable that has branches for two cameras and another that has branches for four cameras. I purchased the one for two cameras. It is designed to mate with Cab Cam cameras and cables. Since I use an Overview camera, I needed to purchase an adapter from Dakota Micro. That combination works fine for a rear view camera on our planter and Hagie Sprayer.
I would assume (always dangerous) that these cables would work with the current GO displays also.
One thought might be to purchase the video cables and try to rearrange the pins to the locations needed for your purposes. This might be fairly easy, maybe not. If some type of sealant has been applied after assembly, the rearrangement idea could be difficult or impossible. Even without any sealant, removing installed pins or sockets often requires some type of special tool.
Finding a source for the plugs, pins etc. and building from scratch may be a better plan. One problem is that certain suppliers don't like to deal in small quantities and you may be forced to purchase more than you need. Having a valid wiring diagram would be vital to the success of this project.
Good Luck.
Edited by tedbear 6/21/2025 07:02
|
|
| |
|
NE South Dakota Clark, SD | Looks a lot like these.
https://www.mouser.com/c/connectors/circular-connectors/standard-cir...
|
|
| |
|
SE Nebraska | Wow that is quite the site. Thanks for posting that link!! |
|
| |
|
NE South Dakota Clark, SD | Allied Electronics, Mouser and Digikey carry so many connectors that you can get lost finding what you need. |
|
| |
|
Ohio | They are a 19 pin Souriau circular plug. I can find the female pin plug for the main plug all day long. I am have trouble finding the male pin version for the aux. I will call mouser tomorrow as they have been very helpful in the past when I have called. |
|
| |
|
Near Intersection of I-35 & I-90 Southern Mn. | Here's a trick I've used a few times. If you are confused as to whether a connector is the one you need (there are literally thousands of different styles), I have asked for a sample. If you have an account in good standing like I did at work, many companies will send you a free sample.
You can then use the free one for your one of a kind project or order larger quantities which the suppliers sometimes require. |
|
| |
|
Hennepin, IL | https://www.digikey.com/en/products/detail/souriau-sunbank-by-eaton/...
I believe that's what you are looking for |
|
| |
|
Ohio | Got everything ordered today. Will share all the part numbers assuming i got the right stuff when it shows up if anyone would like them. |
|
| |
|
Near Intersection of I-35 & I-90 Southern Mn. | I tried the link and got a message informing me to click on a button and hold on it while they determined that I was a human. This did not work at first but I eventually got in. I have not seen this robot detection plan before. |
|
| |
|
Sibley County, MN | I am curious if you built an aux cable with the camera connections? I would be interested in the part numbers if you have.
Did you succeed in building and regular aux cables without camera connections? I wouldn't mind having another aux cable for NTRIP RTK in another tractor as well.
Edited by ks55336 10/13/2025 20:48
|
|
| |
|
Ohio | Yes I did but I haven't done one with the camera yet. I need to get some camera cable to make it with but it appears pretty straight forward. Just using it for the ntrip was pretty easy. I will try to post the links when I get so.e more time. Or just email me |
|
| |
Whats is connector called
