|
Clifton Kansas | It plugged into the serial cable of the agleader harness, and the red wire replaced the F pin on the gray connector that plugged into the back of the brown box module.
I removed it several years ago so I can't remember. That is why I wrote on the tag.
My agleader display harness is where the serial plug connected. The wire with the pin replaced the wire in the F slot in the gray connector on the JD harness that plugged into the socket on the back of the piggyback data logging brown box.
My JD harness has a brown connector that plugs into the brown box and a gray connector that plugs into the piggyback data logging brown box.
Edited by farmerwalt 6/21/2025 08:57
| |
|
Pulling mph data off AgLeader to feed planter
