|
Clifton Kansas | We have a 1890 air seeder we had the data logging module on the back of the brown box.
The agleader dealer got us this cable to get GPS into the brown box for logging. But the speed was from the wheel on the air cart.
It plugged into the serial cable of the agleader harness, and the red wire replaced the F pin on the gray connector that plugged into the back of the brown box module.
Don't know if this helps. But someone might be able to help if they knew about this cable.
Edited by farmerwalt 6/20/2025 17:43
 (IMG_2926[1] (full).JPG)
Attachments
----------------
 IMG_2926[1] (full).JPG (111KB - 10 downloads)
| |
|
Pulling mph data off AgLeader to feed planter
