|
WC Illinois | 1066 guy above is completely correct with his setup. I have been running this setup for seven years or more and love it. You can run with separate rate and section control modules or Trimble has a combination module. My tech set me up with separate modules maybe because I use this setup to control my right, left planter clutches which was very economical to do. I have since upgraded to individual Sure Stop clutches on the planter and that works great. I see most all of the required parts available used. I believe the only new cable purchased, was from the Field IQ to plug into the cable that was plugged into the 450 controller and controls Raven section control valves. Cannot remember if that cable came from Trimble or Ag Express. Hope this helps. | |
|