|
northeast ohio | If you are using a CFX/FM 750 then page 38 in the link below is your desired cabling diagram. We ran this setup in replacement if a Raven 450 for several years with a Schaben pull type. The same modules and most of the cabling now work with our GFX1260 setup. I would also check out the display user guide before starting to buy the components to be sure the functionality is what you are seeking.
Note a 12 section switchbox is required for CFX750’s. They can be hard to find used. The 75503 or 88644 cable (same cable but diff PN) has also been difficult to buy used or NOS. I do have a couple used modules 75774-00 or 75774-01 listed in classifieds if you are interested in them. In some situations you may be better off mounting the module near the Raven components and valve connections and using the full 75526/80540 harness plus adapters to make connections.
https://modernaginc.com/wp-content/uploads/2016/11/cfx-750_cabling-g...
https://talk.newagtalk.com/classifieds/Classified.aspx?id=254257
Edited by neo_ag 6/19/2025 17:40
| |
|
Adding auto swath control to older sprayers
