|
SEIA | Here is a trick for ALL Rogators with Norac (especially UC5 and UC7). When starting up Rogator, turn key to on (Do Not Start machine). Wait until Norac loads on Rogator screen. Then start machine. It will solve a lot of CAN issues with Rogators.
Rogators are great machines, but have a way overloaded CANBUS. Some units have everything (think radio, etc.). Think of it this way, they need to have an 8 lane highway, but only have a 4 lane. The Norac is one of the slowest loading items on the CAN. If you allow it to load and then start machine, things seem to load much better.
Also, here is a website that is very helpful for Norac. You have to use an email to get on the website, but it is very helpful.
www.solutions.norac.ca
| |
|
Rogator Norac UC5 control module
