Near Intersection of I-35 & I-90 Southern Mn. | As I recall when Raven would use a pressure transducer with a 440 etc., they used either another flow meter cable or speed cable but connected it end for end. This was a convenient way solve the connection issues without needing some other special cable with unique connectors.
The cable has 3 wires in it so one end connects to the pressure transducer and the other end to the Liquid Module. A 3 pin mating pair is used somewhere along the line to create a disconnect point. If you are just going to use one pressure transducer (the Ag Leader can handle 3) then you would just have this other cable to connect/disconnect at the hitch point. |
agleader boom pressure
