Near Intersection of I-35 & I-90 Southern Mn. | Is your Liquid Product Module mounted on the pull-type sprayer itself or in the tractor? This could have been done either way.. The pressure transducer(s) must be connected to the Liquid Module wherever it is located.
If your Liquid Module is in the tractor and uses an Ag Leader to Raven adapter, the wires from the pressure transducer(s) on the sprayer need to get to the module in the tractor. This might involve adding an additional cable along side your current cable. It would need some type of disconnect arrangement at the hitch so you can attach/detach the sprayer.
If your Liquid Module is mounted on the sprayer, then the wiring can go directly from the pressure transducer(s) to the Liquid Module. No hitch disconnect is involved since the Module, the pressure transducer wiring and the pressure transducer(s) themselves will remain on the sprayer at all times.
The wiring and connections may add appreciably to the cost.
|
agleader boom pressure
