AgTalk Home
AgTalk Home
Search Forums | Classifieds | Skins | Language
You are logged in as a guest. ( logon | register )

CR7 operator presence error
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
caseihfarmer
Posted 6/14/2025 11:00 (#11261363 - in reply to #11261226)
Subject: RE: CR7 operator presence error


East Central, Nebraska
i am merely guessing but exploring what these plugs do would be where i would start. maybe see if something is labeled remote or seat. maybe its plugged into the seat switch and the switch went bad maybe it was bypassed. obviously something quit or came apart. i havent dealt with much raven in a while but a quick search yielded that diagram that is how i would start. i assume the remote switch on the left is for applcation/mapping but hey if your not sure try that one also. i would guess it would be a plug off the steering controller but i can be wrong on occasion.

Edited by caseihfarmer 6/14/2025 11:04




(raven (full).png)



Attachments
----------------
Attachments raven (full).png (65KB - 12 downloads)
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)