I have an update to my post about using the Agleader Incommand 1200 in place of Raven 440 to monitor anhydrous ammonia rate application.

I purchased an Agleader SC110 Can switch box to go on the Incommand 1200 and the cable to connect the 1200 to the wiring harness that is Raven for the flow meter, on/off valve, and pressure gauge. Also had the early liquid product module checked and it is good.

The flow meter calc number is 720. I would like to apply 140 lbs/acre of actual Nitrogen after accounting for starter fertilizer and earlier chicken litter apllication. My questions are what numbers do I enter in the Agleader 1200 to achieve the desired application rate? Do I divide the 720 by 10 and enter 72? I am not clear on that.

Thanks, Jim