|
| Yes I hope you see similar results. I really like the monitor. Very very fast....can restart and boot the monitor up in less than 30 seconds. And takes seconds to select the next field...change AB lines and or move over a few rows. Temporary shifting over a couple rows is a big deal to us as we do it very frequently, such as moving over for a well, or pivot or trees or you only have 5 rows left at the end of the field and have to move over without making a new AB line. We have tried to make the factory auto steer work in the AFS connect pro 1200 but they lacked a skip button. So if you had to move over a few rows You could either set the AB line to current position...which you never get exactly in the row, or you could remark an AB line over that requires the making of a new AB line...which is absolutely ridiculous, don't need a new AB line because of a temporary move around a well or pivot center point. This is the main reason we put these new Trimble monitors in. Now that we are over the few hiccups with the updates I think we will be pretty happy with the new 1260. | |
|
Trimble FMX to a Trimble GFX1260
