|
| How are you controlling the pump on the pivot? You're going to need a device to break that pump circuit to turn the pump on or off. Getting networking to the pump is pretty easy. Especially if it's that close to you.
Yes, you could go with something like this. You may need a few repeaters, depending on the signal quality. You could also opt for a point-to-point system if you prefer. It depends on the signal quality and personal preference.
https://ayrstone.com/www/product/ayrmesh-hub2t/
Edited by NDKFarms 6/2/2025 11:10
| |
|
Wifi to turn off pivot pump
