|
NCND | Can you just run a separate harness and run a display in the fendt to record your north or south lines then put them in sprayer and use autopath?
You would trigger autopath recording by selecting as scv or something but it should accomplish what you want to do. It would involve a receiver also but if you are dealing with onions that’s high value and receivers are cheap.
Let me edit here. Get a complete separate harness and receiver for your deere monitor and run it to record your lines. The. Transfer them to sprayer. I do this with an old aircart that does not want to play with a g5 monitor. It’s an older case cart but I run a separate harness that’s essentially its own isobus. Straight from implement to a deere screen. Saves all the headaches.
You could run same system and just let the fendt do its thing while the Deere records for the next deere pass. It’s 100% foolproof and not glitchy in any way.
Edited by vailcat 5/25/2025 06:39
| |
|
Fendt waylines to John Deere
