|
| Ok so I have found many threads on here and tutorials and this that and the other thing but A) no one seems to talk about going from Fendt to John Deere and B) the Fuse / Next wayline converter program doesnt seem to be working? I tried to make a log in on the NEXT farming page and the site just crashes. I look on the FUSE site for a download and that just seems to try to take you to agco dealer, to which they just google it like I have been and we run in circles.
What I am trying to do:
We plant our onions with a fairly new Fendt 314 satelitte RTK (novatel if that matters)
We have a 4630 John Deere Sprayer, with 2630 display, right now just starfire 3000 receiver but thinking about upgrading that to 7500 IF I can get the data to convert to the 2630 display. We have "tram lines" that we dont plant in the onions, I don't expect to be able to convert those (as they are highlighted in my Fendt display but I get that that would be a big ask to translate). All I really want is the AB I started the field with, and then I figure I can work off of that in the sprayer, if I have to nudge a little bit thats ok as we offset the tram line a few inches wider but if the heading of the AB is accurate? I understand I could just enter the degree heading for each field to match but it really doesnt seem like it should be that hard to transfer an AB line?
I put a few fields and waylines from the Fendt on the USB to play with. Gives option for KML+ISO or just ISO I left it as both. said to use exFat format on usb so did that. Got them in the Fendt One program,as I saw on here someone mention there is a data conversion tool there, got my boundries and AB all in there then did the Data convert and of course don't see John Deere just about every other format? I thought i read the 2630 could read "shapefiles" so I tried messing around with that, called the folder Rx but probably dont have it right idk would not read it.
Is there something I'm missing? I tried using John Deere Op Center as well, seems like I get some play there, I was able to get boundries to come across, but when I try to upload any other data it shows that its there in Files, but seems like I can't do anything with it and isnt recognizing it even though it says successfully uploaded, no waylines recognized.
John Deere Tech guy is coming out to demo a 7500 receiver next week but I guess I know it can make a straight line but idk if I should bother if I can't get the 2630 to recognize the Fendt data converted some how.
We actually were considering a new R4023 sprayer newer updated version of JD's 600 gal sprayer but with the newer display in that, something about JD files, I find abosultely nothing about how to convert to them, would this be even more impossible with the newer john deere or is there better ways to convert with the newer?
I'd just buy a new Fendt sprayer in a heartbeat and just drink the Fendt koolaid if theyd make a smaller sub-20k lb one! lol!
Thanks for the help guys! | |
|
Fendt waylines to John Deere
