Posted 3/16/2010 22:38 (#1123651 - in reply to #1123059) Subject: RE: Eliminating priority hyd valve on older Magnums- attn:Redwrench
Fairly simple job> remove the #1 remote valve flow adjuster. Pull the flow control sleeve and inner valve spool out of the valve body. Grind off the center land of the inner spool. Reinstall.
I can't seem to copy pictures from other sources to this website. If you are not familiar with the remote valves, I would suggest you get your dealer to handle this job.
Eliminating priority hyd valve on older Magnums- attn:Redwrench
